| 371 | 8 | 16 |
| 下载次数 | 被引频次 | 阅读次数 |
针对微型隔膜泵尺寸和结构上的特殊性,建立简化的隔膜三维数值模型,运用有限元分析软件ANSYS对其进行结构非线性分析,同时建立简化的三维结构的隔膜腔及隔膜的数值模型,采用Workbench中的数据调用功能对其进行流固耦合瞬态分析,最后通过对比两组模拟结果,得出针对隔膜真实工况下最合理的数值模拟方法,从而指导隔膜的设计。
Abstract：In allusion to the specificity of size and structure in the micro diaphragm pump, a simplified three-dimensional symmetric finite element model of diaphragm was established, and laid bare the structural non-linear analysis by using the finite element analysis software ANSYS, while a simplified three-dimensional symmetrical structure whole finite element model of the diaphragm chamber and diaphragm was established and laid bare the analysis for fluid-solid coupling by using the function of date calling in Workbench. At last, in order to elicit a reasonable numerical simulation method, two sets of simulation results have been comparing, so as to guide reasonable diaphragm design.
[1]陈岁繁.隔膜泵关键部件的有限元分析及水力特性的仿真[D].淮南:安徽理工大学,2006.
[2]张鹏.车用膜片式真空泵的研究[D].广州:华南理工大学,2015.
[3]凌学勤,张伟.大型隔膜泵橡胶隔膜的有限元分析[J].中国机械工程,2011,22(15):1819-1822.
[4]Javorik J,Stanek M.The Shape Optimization of the Pneumatic Valve Diaphragms[J].International Journal of Mathematics&Computers in Simulation,2011,5(4):361-369.
[5]Selvadurai A P S.Deflections of a rubber membrane[J].Journal of the Mechanics&Physics of Solids,2006,54(6):1093-1119.
[6]潘孝勇.橡胶隔振器动态特性计算与建模方法的研究[D].杭州:浙江工业大学,2009.
[7]张明远.基于Inventor的隔膜泵实体造型及运动仿真[J].科技视界,2015(18):165-165.
[8]吴杰,张世富,张起欣,等.漂浮潜水泵参数理论优化及内部流场数值模拟[J].重庆理工大学学报自然科学版,2015,29(9):70-74.
[9]张世富,吴杰,张起欣,等.漂浮取水泵内部流场的数值模拟及性能试验[J].流体机械,2016,44(9):1-6.
基本信息:
DOI：
中图分类号:TH323
引用信息:
[1]王成刚,游应强,孙宝坤.基于ANSYS Workbench的微型隔膜泵橡胶隔膜的有限元分析[J].机械,2018,45(03):1-5.
基金信息:
国家自然科学基金(50976080)