| 212 | 1 | 11 |
| 下载次数 | 被引频次 | 阅读次数 |
介绍在Pro/E环境下实现斜齿轮造型的通用方法——扫描成型法。该方法应用Pro/E生成端面和法面齿廓线,并沿螺旋线扫描生成斜齿轮轮廓面。通过裁剪扫描体得到单个轮齿,然后通过阵列生成全部轮齿,最后利用PROGRAM实现斜齿轮自动化设计。
Abstract：Introduce the method modelling for the helical gear in environment of Pro/E. By using Pro/E software, the transverse and normal profile of helical gear are generated, and the profile surface is formed by swept along the helix, then by cutting the body the single tooth is generated, finally, the complete teeth are obtained by pattering the single tooth, and the function of parametric design is realized by using of PROGRAM.
[1]傅则绍.机械原理.北京:石油工业出版社,1998.
[2]孙江宏,姚文席,吴平良.基于UG的斜齿轮三维参数化设计方法——扫描成型法.工具技术,2003,(2):19~22.
[3]蒋晓,唐永志.在Pro/E环境下渐开线齿轮造型技术研究.现代制造工程,2003,(1):22~23.
[4]戴向国,唐海燕,张贵香.Pro/Engineer200i入门与提高.北京:北京人民邮电出版社,2001.
[5]黄圣杰,张益三,洪立群.Pro/Engineer200i高级开发实例.北京:电子工业出版社,2002
基本信息:
DOI：
中图分类号:TH132.4
引用信息:
[1]张慢来,冯进,刘孝光,龙东平.基于Pro/E的斜齿轮三维造型技术研究[J].机械,2004(S1):115-117.
基金信息: