| 398 | 14 | 19 |
| 下载次数 | 被引频次 | 阅读次数 |
通过SolidWorks三维软件建立高速旋转轴天平动态校准装置(以下简称动态校准装置)的三维模型,运用ANSYS Workbench对动态校准装置模型进行模态分析与谐响应分析,得到了该校准装置前六阶模态的固有频率和振型,以及在不同载荷组合情况下,校准装置在X、Y和Z三个方向上的最大振幅及其对应的频率。基于上述的分析计算结果,验证了动态校准装置满足设计要求的可行性;同时,分析了在不同载荷组合条件下,该校准装置的变形规律,为后续动态校准装置的结构设计与其重要零部件结构优化提供了参考依据。
Abstract：In this paper, SolidWorks software is applied to establish the 3D simulation of the dynamic calibration device of the high-speed rotary shaft, and the modal analysis and harmonic response analysis was carried out based on ANSYS Workbench. The natural frequency of the first to sixth modes and the mode of vibration of the calibration device as well as the maximum amplitude and the frequency in the X, Y and Z directions under the load was obtained. The result verifies the feasibility of the dynamic calibration device to meet the design requirements. The deformation law of the calibration device under different load groups are analyzed, which provides a reference for the structural design of the dynamic calibration device and the optimization of the important parts in the future.
[1]战培国.国外风洞天平校准技术研究进展[J].航空科学技术,2012(2):18-20.
[2]谢斌,史玉杰,易国庆,等.70kN载荷应变天平校准系统研制进展[J].实验流体力学,2014,28(5):71-75.
[3]刘志勇,苗磊,陶洋,等.基于Kriging模型的风洞应变天平静态校准方法[J].航空学报,2016,37(12):3685-3691.
[4]湛华海,张旭,吕治国,等.一种单矢量风洞天平校准系统设计[J].实验流体力学,2014,28(1):70-74.
[5]刘昌领,陈建义,李清平,等.基于ANSYS的六缸压缩机曲轴模态分析及谐响应分析[J].流体机械,2012,40(8):17-21.
[6]刘涛,王卫辉,鹿飞,等.基于Workbench的箱形伸缩臂模态及谐响应分析[J].制造业自动化,2015(4):80-82.
[7]刘亚东,计洪旭,刘兴旺,等.基于ANSYS Workbench的迷宫式压缩机活塞杆谐响应分析[J].压缩机技术,2018(2):47-50.
[8]翟辉辉,周海超.某汽车车门试验模态分析[J].机械,2018(12):59-62.
[9]Gebbink R,Wang G,Zhong M.High-speed wind tunnel test of the CAE aerodynamic validation model[J].Chinese Journal of Aeronautics,2018(3):439-447.
[10]Boutemedjet A,Samard?i?M,?ur?i?D,etal.Wind tunnel measurement of small values of rolling moment using six-component strain gauge balance[J].Measurement,2018(116):438-450.
[11]Ma Y,Xie S,Zhang X,et al.Hybrid calibration method for six-component force/torque transducers of wind tunnel balance based on support vector machines[J].中国航空学报(英文版),2013,26(3):554-562.
[12]Zhigang Fan,Jin He,Baojun Zuo,et al.Research on six-degree-of-freedom calibration system for wind tunnel balances with a collimated laser beam[J].Chinese Optics Letters,2003,1(2):82-84.
基本信息:
DOI：
中图分类号:V211.74
引用信息:
[1]陈应飞,尹湘云,王超等.基于ANSYS Workbench的高速旋转轴天平动态校准装置的模态与谐响应分析[J].机械,2019,46(07):11-16+35.
基金信息:
国家自然科学基金重大仪器专项课题(81527806-1);; 四川省科技计划项目(2018GZ0289)