| 474 | 18 | 16 |
| 下载次数 | 被引频次 | 阅读次数 |
以某产品的模具为例,对虚拟装配技术在模具产品上的运用进行了初步的探讨,从虚拟装配的实现流程、产品的层次结构划分、装配顺序规划及路径规划进行了分析,并基于CATIA实现了该产品组件的装配过程仿真,确定了合理的装配顺序和路径,为虚拟装配技术在产品上的深入应用提供了有益的探索。结合装配工艺的特点和要求,提出了基于虚拟装配技术进行装配工艺设计的流程;最后针对装配工艺设计的实现方法和软件系统做了概述。
Abstract：To die of a product as an example, has carried on the preliminary discussion on the application of virtual assembly technology in mold products, from the virtual assembly process, the product of the hierarchical structure, assembly sequence planning and path planning are analyzed, and based on CATIA to realize the simulation of the assembly process of the product assembly, assembly sequence and the path to determine the reasonable, provides a useful exploration for the further application of virtual assembly technology in the products. Combined with the characteristics and requirements of the assembly process, the assembly process design flow of virtual assembly technology based on; finally, method and Realization of software system of assembly process design are summarized.
[1]吴锐.面向工艺重用的装配关键技术研究[D].长沙:国防科技大学,2008.
[2]邢莉,等.基于DELMIA的电动工具虚拟装配技术研究[J].机电工程,2008,25(6):35-38.
[3]陈宁,等.基于DELMIA的发动机装配过程可视化仿真[J].计算机辅助工程,2010,19(4):66-69.
[4]张刚,等.面向装配的特征层次建模方法研究[J].计算机集成制造系统,2005,11(7):916-920.
[5]龚京忠,等.基于有向图子装配识别的装配序列规划[J].机械设计与制造,2008,9(9):201-203.
[6]FUHRMANN S.Designing a visualization system for hydrological data[J].Computers&Geosciences,2000,26(1):11-19.
[7]贾朝定.基于DELMIA的虚拟装配技术[J].中国航空学会2007年学术年会,制造专题30:1-6.
[8]Jayaram S,Connacher H,Lyons K.Virtual assembly using virtual reality techniques[J].Computer-Aided Design,1997,29(8):575-584.
[9]郑轶,等.虚拟装配关键技术及其发展.系统仿真学报,2006,3(18):649.
[10]吴维江.基于DELMIA的飞行器虚拟装配技术研究与应用[D].南京:南京航空大学,2008.
[11]李澍.飞行器虚拟维修关键技术研究与环境实现[D].南京:南京航空大学,2007.
[12]J.Zhao,S.Masood.An Intelligent Computer-aided Assembly Prosse Planning System[J].Advanced Manufacturing Technology,1999(15):332-337.
[13]K.A.Abdel-Malek,et al.Detemining Interference between Pairs of Solids Defined Constructively in Computer Animation[J].Engineering with Computers,1998(14):48-58.
[14]宗亚东,王得胜,李朝红.弧齿锥齿轮参数化建模方法研究[J].机械,2012,39(12):58-61,73.
基本信息:
DOI：
中图分类号:TG95
引用信息:
[1]姚理,刘慧琴,何小国等.基于CATIA中DELMIA的虚拟装配技术的应用[J].机械,2014,41(02):46-50.
基金信息: