| 845 | 40 | 35 |
| 下载次数 | 被引频次 | 阅读次数 |
数控机床刀具磨损监测对于提高数控机床利用率,减小由于刀具破损而造成的经济损失具有重要意义。文章有针对性地回顾了国内外各种刀具磨损监测方法的研究工作,详细叙述了切削力监测法、切削噪声监测法、功率监测法、声发射监测法、电流监测法以及基于多传感器监测法等六种刀具磨损监测方法。本文通过比较各种监测方法的优缺点,提出基于多传感器监测法是数控机床刀具磨损监测方法的未来发展的主要方向。
Abstract：CNC tool wear monitoring has great importance in improving the utilization of CNC machine tools and in reducing the economic lossos due to the tool breakage. This article is well targeted in reviewing several researches on the study of various tool wear monitoring method at home and abroad. Six tool wear monitoring methods are described in detail, which are the cutting force monitoring, the cutting noise monitoring, the power monitoring, the sound launch monitoring, the electric current monitoring as well as the monitoring method based on the multi-sensor monitor. Comparing with the merits and demerits of each monitoring methods, the article suggests that the monitoring method based on the multi-sensor monitor would be the main direction of the development of CNC tool wear monitoring in the future.
[1]续永刚.FMS环境下刀具磨损寿命预测研究[J].石家庄职业技术学院学报,2005,17(6):35-37.
[2]吴学忠,李圣怡.基于多传感器的道具状态监测系统[J].数据采集与处理.1999,14(2):200-203.
[3]Adam G.Rehorn,Jin Jiang,Peter E.Oban.State-of-the-art methods and results in tool condition monitoring:a review.[J].Int J Adv Manuf Technol.2005,(26):693-710.
[4]高宏力,许明恒,傅攀.一种在线监测铣刀磨损量的新方法[J].中国机械工程,2005,16(12):1069-1072.
[5]胥光申,卢秉恒.刀具磨破损时监测系统的开发与研究[J].西安交通大学学报1992,26(5):59-74.
[6]W.L.jin and P.K.Venuvinod.An optical fiber sensor based cuttingforcemeasuring device[J].Int.J.Mach.Tool Manufact,,1995,35(6):877-883.
[7]M.P.Groover,R.J.Karpovich.Astudy of the relationship between remotethermocouple temperatures and tool wear in machining[J].Int.J.Prod.Res,1977,25:129-141.
[8]D.Spirgeon and R.A.C.Slater.In-process indication of surface roughnessusing a fibre-potics transducer,Proc.[J].15th Int.Machine Tool Design andResearch Conf.,1974:339-347.
[9]康文利,伊淑梅,卢永霞.基于LABVIEW的切削力监控系统[J].组合机床与自动化加工技术,2004,(8).
[10]Y.choi.R.Narayahaswami.A.chandra.Tool Wear monitoring in ramp cuts in end milling using the wavelet transform[J].Adv Manuf Technol,2004.
[11]邵华.铣削功率监控研究与刀具监控系统的研制[D].上海交通大学博士论文,1994.
[12]王海丽,刀具状态多传感器监控策略的研究,上海交通大学博士论文,1999
[13]徐顺利,崔凤魁,杨建玺,刘建亭.用切削功率进行刀具磨损在线监测的研究[J].轴承,1995.
[14]欧阳惠斌.基于功率变化率的刀具磨损在线监测系统[J].仪表技术,2003,(2).
[15]王忠民,王信义,杨大勇,陈爱弟.刀具磨损状态在线监测设计.制造技术与机床,2006,(6).
[16]T.Moriwaki and I.Inasaki and M.Yobito.A new approach to automaticdetection of life of coated tool based on acoustic emission measurement[J].Trans.ASME,J.Eng.Ind.,1990,112:212-218.
[17]杨青,袁哲俊.铣刀破损的声发射检测技术[J].组合机床及自动化加工技术,1992,(3).
[18]王军政,王信义.监测机床主电机电流判断刀具磨损和破损.新技术新工艺.1990(6)
[19]冯艳,罗良玲,夏林.基于LABVIEW的刀具磨损在线监控系统[J].监控监测,2006,(12).
[20]刘志艳,王军.用声发射和电机电流检测技术实现刀具磨损的监测,机械,1999,(4).
[21]程敢峰.刀具状态在线监控策略研究[D].上海交通大学硕士学位论文,2004.
[22]张文思,李培智,张家梁.基于多特征量的刀具磨损模糊判决研究[J].装备制造技术,2007,(2).
[23]王琪.刀具磨损和破损的综合监测法[J].新技术新工艺,2003,(10).
[24]彭军.传感器与检测技术[M].西安:西安电子科技大学出版社,2003,385-386.
[25]曹焕亚,周纯江.考虑刀具磨损的数控加工误差的预测研究[J].机电工程,2008,25(5):39-41.
基本信息:
DOI：
中图分类号:TG659
引用信息:
[1]马旭,陈捷.数控机床刀具磨损监测方法研究[J].机械,2009,36(06):70-73.
基金信息: