509 | 14 | 11 |
下载次数 | 被引频次 | 阅读次数 |
介绍了井下涡轮发电机的工作原理:涡轮马达将泥浆的压能转变为机械能,并通过发电机将机械能转变为电能向外输出。由于泥浆涡轮和永磁发电机安装在同一转轴上,联合工作时二者扭矩必须相等,因此为了得到两者联合工作的最佳性能,找到最优工作点,通过调节流体流量和电路总阻值来对井下涡轮发电机工作性能进行相关的研究,并结合了井下涡轮发电机现场工作环境和要求,提出井下涡轮发电机工作中可能出现的问题并给出了相应的解决方案。
Abstract:This article introduce the working principle of downhole turbine generator:Mud pressure be transformed into mechanical energy by turbo motor,and mechanical energy be transformed into electrical energy through the generator.As the mud turbine and permanent magnet generator mounted on the same shaft,the torque must be equal,therefore,in order to get the best performance of the joint work and find the optimal operating point,this article research the performance about the downhole turbine-generator by adjusting the fluid flow and changing the total resistance,field application of combined,and made the problems about Downhole turbine generator to work and the given the solution to solve these issues.
[1]张绍槐.智能油井管在石油勘探开发中的应用与发展[J].石油钻探技术,2004,32(4):1-4.
[2]苏义脑,盛利民,李林,邓乐.地质导向钻井技术及其在我国的研究进展[D].中国石油天然气集团公司钻井承包商协会论文集,2005.
[3]万邦列,李继志,等编著.石油工程流体机械[M].北京:石油工业出版社,1999.
[4]唐任远,主编.现代永磁电机理论与设计[M].北京:机械工业出版社,1997.
[5]冯哲峰,杨恩星,陈国柱.永磁直驱风力发电机的单位功率因数控制[J].机电工程,2007,24(9):70-74.
基本信息:
DOI:
中图分类号:TE921
引用信息:
[1]杨霞,刘勇.井下涡轮发电机工作性能研究[J].机械,2010,37(10):39-41+44.
基金信息: